Heidi Verify tilføjer et ekstra lag af AI-drevet gennemgang til dine genererede noter. Det analyserer dine noter mod dine kildedokumenter - transskription og klinisk kontekst - og markerer potentielle uoverensstemmelser, så du kan fange de ting, der måske overses under en manuel gennemgang, især i lange eller komplekse konsultationer. Du kan spore ethvert faktum tilbage til transskriptionen og løse problemer med et enkelt klik.
Det lærer du
Hvordan Heidi Verify analyserer dine noter
Sådan kører du en verifikation og læser resultaterne
Sådan gennemgår du problemer og bekræftede enheder
Hvordan inline-markeringer fungerer i dit notat
Sådan anvender du foreslåede rettelser
Sådan giver du feedback på resultater
Almindelige spørgsmål og fejlfinding
Kom i gang med Heidi Verify
Efter at dit notat er genereret, vises der en Verify-knap i værktøjslinjen nederst til højre i din notatredigerer. Når du klikker på det, starter Heidi Verify-processen ved at køre en analyse, der kontrollerer dit notat mod dine kildedokumenter (transskription og klinisk kontekst) for at identificere potentielle uoverensstemmelser eller udeladelser.
Analysen tager typisk mindre end 2 minutter. Du behøver ikke at vente - du kan lukke panelet, navigere til andre sessioner eller fortsætte med at arbejde på andre dokumenter. Du vil se statusopdateringer, når Heidi scanner notatet, kontrollerer enheder og identificerer potentielle uoverensstemmelser. Når analysen er fuldført, får du en underretning om at se dine resultater.
Kørsel af en verifikation
Start en verifikation
Klik på Verify-knappen i værktøjslinjen nederst til højre i dit notat. Knappen ændres til Analyserer... og et panel åbnes, der viser fremskridt. Du kan lukke panelet under analysen - det fortsætter i baggrunden. En underretning vil give dig besked, når resultaterne er klar.
Kør igen efter redigering
Hvis du har redigeret dit notat og vil kontrollere det igen, skal du klikke på opdateringsikon i paneloverskriften for at køre analysen igen på det opdaterede notat.
Gennemgang af resultater
Når analysen er fuldført, åbnes verifikationspanelet med to faner: Problemer og Alle enheder.
Heidi Verify fungerer ved at udtrække kliniske enheder fra dit notat - disse er de enkelte facts og detaljer, der udgør en klinisk journal. Ting som medicinnavne, doser, diagnoser, symptomer, procedurer, vitale tegn og patientdemografi. Hver enhed kontrolleres mod transskriptionen og konteksten for at se, om den er nøjagtigt fastslået.
Problemfane
Denne fane viser alt, der måske har brug for din opmærksomhed, grupperet efter prioritet:
High priority - could directly affect patient safety (e.g. potential issues with diagnoses, examination findings, lab results, or management plans; or critical clinical facts missing from the note)
Medium priority - clinically relevant but less likely to cause harm (e.g. potential issues in a referral, assumed patient age or gender, or contextual information missing from the note)
Low priority - not consequential to the clinical picture (e.g. minor details, small talk, or background information that doesn't affect clinical decision-making)
Each issue shows the entity name, its category, and what type of issue was detected. Click any issue to see more detail, including where it appears in the transcript.
If no issues are found, you'll see a confirmation that all content appears to be supported by the transcript with no missing entities.
Alle enheder-fane
This tab lists the clinical entities found in the note with their verification status. You can filter entities by category using the dropdown at the top of the tab.
Enhedskategorier
Each entity is automatically classified based on its clinical type:
Kategori | Eksempler |
Medicin | Medicinernavne, doser, hyppighed |
Diagnoser | Tilstande, vurderinger |
Symptomer | Patientrapporterede klager |
Procedurer | Kirurgiske indgreb, interventioner, undersøgelser |
Labs | Blodprøver, patologiresultater |
Vitale tegn | Blodtryk, pulsfrekvens, temperatur |
Historik | Tidligere medicinehistorie, familiehistorie |
Demografi | Alder, køn, erhverv |
Andet | Alt, der ikke passer til ovenstående |
Visning af kilden
Each entity links back to the part of the transcript or context it was identified from. Click View in transcript or View in context on any entity to see the original source text. This lets you quickly cross-reference the note against what was actually said in the consultation.
💡Bemærk: Heidi Verify kontrollerer, at notatet stemmer overens med det i transskriptionen. Det verificerer ikke korrektionen af transskriptionen selv. Hvis et medicinnavn blev forkert hørt under konsultationen (f.eks. på grund af baggrundsstøj), stammer den fejl fra transskriptionen, og Heidi Verify kan ikke fange den.
Inline-markeringer
Heidi Verify highlights entities directly in your note editor with a coloured marker, so you can see results in context without switching to the panel.
Enheder med problemer
Entities with potential issues are shown with an orange wavy underline. These are on by default so you can spot problems at a glance.
Bekræftede enheder
Verified entities are shown with a green highlight. These are off by default to keep your note clean - you can toggle them on from the All Entities tab if you want a full visual overview of what has been checked.
Toggle-kontrolelementer
Use the Highlight issues and Highlight verified switches in the panel footer to turn highlights on or off. Your preferences are saved for future sessions.
Interaktion med markeringer
Click a highlight in the note to select it in the panel and see full details
Click an entity in the panel to scroll to and highlight it in the note
Hover over a highlight to see a quick summary, including its source in the transcript
Påfør foreslåede rettelser
For some issues - such as potential discrepancies or content not supported by the transcript - Heidi Verify may suggest a fix.
Click Apply fix to update the note with the suggested replacement, then review before accepting. The entity briefly flashes green to confirm the change, and the issue is resolved.
For content that isn't supported by the transcript and should be removed entirely, click Remove from note to delete it.
You can undo any applied fix if needed.
Alternatively, if you prefer a different correction to those generated, you can always edit the note manually instead.
Give feedback
You can help improve Heidi Verify by providing feedback on individual results.
Thumbs up - confirms Heidi got it right (e.g. correctly verified an entity, or correctly flagged an issue)
Thumbs down - indicates Heidi got it wrong (e.g. incorrectly verified something, or incorrectly flagged something as an issue)
You can optionally add a text comment with more detail. Your feedback helps Heidi learn and improve over time.
Ofte stillede spørgsmål
Where can I find the Verify button?
The Verify button appears in the bottom-right toolbar of your note editor after a note has been generated. If you don't see it, the feature may not yet be enabled for your account. Contact our Support team to find out more information.
Do I still need to review my notes manually?
Ja. Heidi Verify is not a replacement for your own review. The analysis may not catch every issue.
What types of issues does it flag?
Heidi Verify can flag several types of discrepancies, including: content in the note that doesn't appear in the transcript, information that contradicts the source, details from the consultation that are missing from the note, and supported inferences that are reasonable but weren't explicitly stated.
What does "supported inference" mean?
A supported inference is something that appears in the note but wasn't explicitly stated in the transcript - however, it's a reasonable clinical conclusion based on what was discussed. These are flagged for your awareness but aren't necessarily errors.
Can it catch errors in my transcript?
Nej. Heidi Verify checks your note against the transcript. If the transcript itself contains errors (e.g. a medication name was misheard), Heidi Verify cannot detect that - it only flags when the note diverges from the source.
Can I verify a note I've edited?
Ja. If you've made changes to your note, click the refresh icon in the panel header to re-run the analysis. The new analysis will reflect your edits.
How long does the analysis take?
Typically under two minutes. You can navigate away, work on other sessions, or continue documenting while it runs. You'll get a notification when the results are ready.
What if a flag is wrong?
If you disagree with a flag, simply give it a thumbs down. Taking this action tells us the flag was incorrect, which helps improve accuracy over time. You can optionally add a comment explaining why.
Can I turn off the inline highlights?
Ja. Use the toggle switches in the footer of the verification panel to turn highlights on or off. Your preferences are saved for future sessions.
What if I don't want to use Heidi Verify?
Simply don't click the Verify button. The feature is entirely opt-in and never runs automatically. Your note workflow is unaffected if you choose not to use it.
Can I run Heidi Verify on any note?
Heidi Verify works best with notes generated from a live transcript. The richer the source data (transcript and clinical context), the more thorough the analysis.
Which plans include Heidi Verify?
Heidi Verify is currently in beta and available to some users on Practice and Enterprise plans. We're actively improving it based on your feedback. Please contact our Support team to find out more.